Railway and Transportation Systems

Connections of signaling (BP, WT, ERTMS) cabins and equipment to the network system Stable operation of the prepared network in Cisco switches in all stations Installation of all radio equipment along the line for CBTC Reporting and assigning necessary configurations to all radios via HIRSCHMAN switches Integration of all stations with TNS (Transmission Network Systems) Periodical recording of the CFMT radio tracking system Monitoring train-radio communication in all BPs (Block Processor) Error detection

Connections of signaling (BP, WT, ERTMS) cabins and equipment to the network system, Measurements of all camera cables used in stations, Commissioning of all cameras (moving and stationary), Configuration of CISCO switch configuration, Connection and control of CCTV cabinets with TNS (Transmission Network System), Parameterization of servers

• Making all software and adjustments and system integration of Vipedia device produced by ASL company.
• Making the necessary tests and making the relevant adjustments of the MPS10 and MPS20 devices produced by the ASL company.
• Making the announcement system integrations of the SAP devices produced by ASL company and performing the related tests.
• Correct version configurations and control of network card required for Router and TNS
• Inoperative speaker detection.
• Making all the configurations of the ANS device on the router. (With static and dynamic files).
• Control of all software and hardware structures in the ANS system
• Integration tests with other systems
• Adding and controlling to TNS system
• Installation and version updates of the MPS system with manual announcement
• Necessary intervention in all problems that may arise (card replacement, amplifier replacement, etc.)
• Support in server setup in the control center (with Linux Opensuse operating system)
• Control of all stations in the server program

Making power measurements of all PIDs

• Measurements of all PIDs with FLUKE Wired Network Device
• Network settings of all PIDs (IP configurations and control from the switch in the cabinet)
• Following up the upgrades within the scope of the project and making upgrades when necessary
• Setting up the Client PCs in the station (controlled by MACXS program) and making Windows restrictions.

• Measurements of all devices with FLUKE Wired Network Device
• Network configurations (IP configurations and control from the switch in the cabinet)
• Connecting all devices to the central clock server system